Washable filter pads are used in air conditioning and air ventilation equipment, when regeneration of the mats after cleaning is required. HS-synthetic fibre filter pads consist of randomly arranged curled synthetic fibres in a multi-layered structure with a graduated density towards the clean air side of the media. Resin and/or thermal bonding provides for a high performance nonwoven fleece. Its engineered structural design has proven to guarantee longer life and high dust holding capacity with low differential pressure-loss in the most demanding applications. After dust saturation filter mats can be easily cleaned either by blowing or washing and be reused.

Standard roll dimensions are 20 x 2 m, pads of all sizes can be cut on order.

Datasheet

These filter pads are applied in air conditioning or air ventilation equipment for increased perfomance levels as well as supply air filtration for surface finishig. After dust saturation these mats are simply replaced by new ones.

Standard roll dimensions are 20 x 20 m and cut pads can be supplied as required.

Datasheet

HS-Glas Fibre Pads: HS-Glas 1” and 2”
These standard filter mats are suitable ideally for climatic and ventilation systems they consist of flexible glass fibres, which are glued together with a synthetic resin on their corsslinks. The fibre density increases towards the clean air side and ensures thus a large dust storage capability. For more efficient dust extraction the fibre are coated with a dust-adhesive agent. This dust binder is non toxic.

HS-Glas Fibre Pads: HS-Glas-C
These high-quality filter mats are especially designed for strict air cleanliness requirements, e.g. as supply air filters for drying units or paint spray installations. According to the DIN 4012 this material is not flammable. The filter mat consists of the finest glass fibres, which are solidified in themselves to a fleece on the clean air side.

HS-Glas Fibre Pads: HS-PA
This special filtermat is used for high grade arrestance of paint mist in paint spraying cabins or paint shops. The HS-Glass fibre mat is made of a random pattern of thin glass fibres with a spring-like elasticity. The density of fibres increase progressively towards the clean air side, while the fibres becoming finer and finer within the media. Due to this specific structure a high storage capacity of paint particles is obtained in the 50 mm depth of the media. Under favourable conditions it is possible to hold more than 3500 g of paint-mist per sqm of filter area. The mat is not flammable as required by the DIN 4102-B1

Datasheet

Filterpads can be manufactured in virtually any size. We offer a low cost customized holder frame to meet this variability. A broad range of frame options are availiable rangig from frame depth 20 to 96 mm and various raw materials like galv. steel, aluminum and plastic.

Datasheet

The HS-AirCone filter is suitable for all pipe or tube channel applications offering „safe-ends“. The filter can be fixed by using a T-piece and thus can be installed and replaced easily. Due to the conical shape of the filter it is offering a surface about 5 times greater than the plain diameter of the tube. HS-AirCone therefore reaches a much lower pressure drop and longer servie-lifetime in comparison to a flat filter or filterpad.

Datasheet

HS-Ring Pak Ringfilters are designed for pre-filtrering the supply air of combustion engines, compressors and fans. The durable filtermedia consists of latex bound natural fibres.
Technical data:

HS-Ringpak are available in various sizes and will be customized to your requirements.

Type HS-Fibro

HS-Synthetic Filterpads can be manufactured also as "big-bags" or with wireframes in accordance with your defaults. Also punching and/or round filter pads can be supplied.