These compact finedust filters are used as pre- and mainfilters in stationary applications such as HVAC and compact filterunits. With mobile applications HS-V-Pak are used in machinery and vehicles (i.e. Waste disposal). HS-V-Pak filters are in use where smalles installation space or flexible arrangements are required. HS-V-Pak filters allow maximum usage avialiable space in channel sections. Our advanced prodution technology enables us to bring in the maximum filtersurface on smallest filtersizes. This allows operational cost & energy consumption reductions by lower pressure drop, longer lifetimes and reduction of dimensions of new planned systems. HS-V-Pak filters consist from fully combustible raw materials so the filter can be completely incinerated after use.

Standardsize: 86,5x202x600 mm.

Datasheet

High performance compact filters are available in three filter classes.

Airflow volumes up to 5000 [m³/h] with only 292[mm] installment depth required.

HS-Mikro Pak filters are mostly used at air conditioning, ventilation and turbine applications for fine dust filtration. These filters are used as primary and/or main filters to prevent toxic gas, aerosol and general dust pollution. They are especially suited for for handling large airflow volumes and achieve long service life times due to their large dust storage capacity.HS-Mikro Pak filters fit most standard supporting frames from various manufacturers. The filtermedia consits of high quality glass fibre paper with varying efficiencies. Thermoplastic spacers between tightly packed individual filter folds, ensure even spacing. The supporting frame is made form plastic and therefore makes disposal easy because the complete filter could be reduced to ash, once burned.

The design and construction of the HS-Mikro Pak provides a high rigidity and corrosion is impossible. The filter media is water resistant and also suitable for use in conditions with high humidity. A temporary increase in the of the pressure drop is normal. With reduced humidity the pressure drop returns to normal levels.

HS-Mikro Pak filters can be fitted with the clean-air or dust side and are great space savers when used in new systems due to their minimal mounting depths. Options like foamed gasktes or burst protection gills on the clean air side are possible - please ask for special applications.

Datasheet

Datenblatt

HS-Mikro Pak 4V ECONERGY are the more sustainable alternative for all HVAC and power systems. The large filter areas made of energy-saving filter media offer low initial pressures and an outstanding dust holding capacity for compact filters. This allows the potential energy savings in the processes concerned to be exploited to improve the CO2 balance. The plastic components of HS-Mikro Pak 4V ECONERGY consist of up to 60% renewable raw materials to also improve the CO2 balance of this consumer product. Unlike other resource-saving compact filter solutions, HS-Mikro Pak ECONERGY does not pose any risks in terms of efficiency or tightness. The robust plastic frame is corrosion-free and allows easy disposal, as the filter is fully incinerable and will emit 90% less fossil CO2 when incinerated after usage.
The filter complies with the requirements of VDI 6022 . Optionally, HS-Mikro Pak 4V ECONERGY can be equipped with advanced synthetic filter media.

Datasheet

HS-Mikro Pak 4V PPE offers impressive performance thanks to the use of the latest, energyefficient filter media, which are brought into a perfect pleat geometry by our innovative pleating center. This ensures minimal design resistance. The revolutionary nanofiber filter media offers dust holding capacities of up to >1.1 kg with standard dimensions, which is up to twice the usual dust load for compact  filters. At the same time, it is characterized by an incomparably low operating pressure difference. As a result, the operating energy requirement of the HS-Mikro Pak 4V PPE is 25% below the energy classification value for energy class A+, at just 650 kWh/a. The filter medium is extremely robust, tear-resistant and completely moistureresistant. HS-Mikro Pak 4V PPE is therefore not only suitable for  realizing considerable energy saving potential in HVAC systems, but also particularly suitable for process air applications, including power generators such as gas turbines and compressors, as well as for offshore applications. It meets the requirements of VDI 6022 and thanks to the extremely low operating pressures and high dust holding capacity, it is possible to significantly extend maintenance intervals depending on the application.

Datenblatt

Datasheet

HS-Beta Pak are robust finedustfilter for depths small as 48 mm and 96 mm by request up to 150 mm. Suited for Reconfiguration or replacement of AC units, substituting common Zig-Zag-pleated with a more hygienic filter. Also applicable at systems where actual filter efficiency is not enough (i.e. finedust problems in city-air).

HS-Beta Pak are robust fine dust filters, employed as preliminary or main filters when long filter service lives are required in large and/or variab- le volume flows. Typical areas of application are electronics and computer rooms, pharmaceutical production areas, research laboratories, hospitals, industrial ventilation and preliminary filtration for particulate air filters. They fit in all standard fra- mesystems or mounting frames of various manuf- acturers for particulate air filters, according to the design variant. They are suitable for use as replace- ment filters in all standard commercially available mounting frames. Due their small depth HS-Beta Pak save space in new constructed ventilation systems.

These filters are also great space savers when existing venti- lationssystems need to be rigged up for higher filter classes. The sturdy plastic frame fulfills the demands for high rigidity and hygiene combined with the ease of disposal since the filters are com- pletely metalfree and thus fully incinreable.

Datasheet

This durable fine dust filter is suitable as pre- or main-filtration element in systems where relatively high amounts of volumes as well as variable airflows is typical. Areas of use include pre-filtration of airborne particles, as filter for industrial processing, or in hospitals, computing centers, offshore or power generating systems. The filtermedia by standard is high quality glass fibre paper. A temporary rise of the pressure drop with high moisture levels is normal. This filtertype might optionally be fitted with special heat resistant thermoplastic spacers for temperature ranges of up to 120°C. Such filters are marked with the model name HS-Makro F-T.
Due to our flexible manufacturing process we can fit the filter into mounting frames by all major brands. We also deliver matching duct cases and assembly systems.

Datasheet

This durable fine dust filter is suitable as pre- or main-filtration element in systems where relatively high volumes as well as variable airflows are typical. Areas of use include pre-filtration of airborne particles, as filter for industrial processing, or in hospitals, and computing centers. Due to our flexible manufacturing process we can fit the filter into mounting frames by all major brands. The media is laid in narrow pleads, and fixed evenly by thermoplastic spacers. Single filter packages are placed into the mounting frame forming a V-shape.  This design allows maximum filter surface within comparably small filters. Various customized specifications are possible.This filtertype might optionally be fitted with special heat resistant thermoplastic spacers for temperature ranges of up to 120°C. Such filters are marked with the model name HS-Makro FV-T.

Datasheet

This durable fine dust filter is suitable as pre- or main-filtration element in systems where relatively high volumes as well as variable airflows is typical. Areas of use include pre-filtration of airborne particles, as filter for industrial processing, or in hospitals, and computing centers. The high-quality media is laid is narrow parallel pleads, and fixed evenly by spacers made from corrugated aluminum foil – these make it possible to use the filter in high temperature environments up to 350 °C, electrical grounding of the filter, and provide a maximum of bust protection . Profiled spacers with seamed edges provide the filter package with extra stability.
HS-Makro filters are silicon-free as a standard, and can therefore be employed for surface technologies.
Due to our flexible manufacturing process we can fit the filter into mounting frames by all major brands. Upon request HS-Makro Filters can be supplied with FDA conform design.

Datasheet

Slim and environmentally friendly design for high efficiency

Airflow volumes up to 3600 [m³/h] with only 100 [mm] or 150 [mm] depth required.

HS-ECO Pak filters are mostly used with air-conditioning, ventilation for fine dust filtration. The filters are used as pre- and / or main filters for suspended matters and general dust pollution. They are especially suited for use in conditions for handling large airflow volumes and achieve long service life times due to their large dust storage capacity.

HS-ECO Pak filters fit most standard supporting frames from various manufacturers. The filtermedia consists of a ultra fine glass fibre paper with varying thickness and filter efficiencies. Thermpoplastic threads are used as spacers between the densly and tightly packed individual media folds, to achieve even spacing.

Its design and construction provides a high rigidity. The filter media is water repellant and also suitable for use in conditions with highes humidity levels. A temporary increase of the pressure drop is normal. With reduced humidity the pressure drop returns to normal levels.
HS-ECO Pak filters can be fitted with the clean-air or dust side inside or outside, and are great space savers when used in new systems due to their minimal mounting depths. Options like protection grids or gaskets are availiable upon request.

Datasheet

These filters are designed for high temperature processes and are used for supply and exhaust air purification. They are for example used in the range of drying ovens, sterilization equipment, hot gas venting etc. The pleated filter medium of these filters is fixed by glass fiber spacers. The filter medium is mounted between protective grills made ​​of stainless steel (1.4301) and protected against shedding by a glass-fibre nonwoven. The design allows operating temperatures up to 350 °C for HS-Makro F-HT. If necessary, these filters can also be supplied  ATEX compliant. HS-Makro F-HT are sealed with fiberglass and are therefore completely silicone free. A glassfibre cord serves as gasket.

Datasheet

These filters are designed for high temperature processes and are used for supply and exhaust air purification. They are for example used in the range of drying ovens, sterilization equipment, hot gas venting etc. The pleated filter medium of these filters is fixed by glass fiber spacers. The filter medium is mounted between protective grills made ​​of stainless steel (1.4301) and protected against shedding by a glass-fibre nonwoven. The design allows operating temperatures up to 350 °C for HS-Makro F-HT. If necessary, these filters can also be supplied  ATEX compliant. HS-Makro F-HT are sealed with fiberglass and are therefore completely silicone free. A glassfibre cord serves as gasket.

Datasheet

HS-Strongshield Filters offer the maximum security at processes with high hazard risk potentials. The groundbreaking HS-Strongshield filter technology provides a superior media tensile strength up to 400% higher than usual glass media. Different to usual Filters the HS-Strongshield filtermedia is armored by rigid layers of polyester. This ensures that HS-Strongshield filters offer an unmatched safety at extreme conditions such as high moisture, shock pressures, accident failures of pre-filterstages, presence of explosive atmospheres etc.. The air entry side of the filters is metalized and conductive to depleat any electrical potentials that can cause ignitions by grounding connectors on the filter. Hence HS-Strongshield filters ideally suit the safety needs of processes in ATEX areas. No additional protective grids are required due to the robust media structure.

HS-Strongshield filters are dedustable by typical pulsejet or blast systems.

Datasheet

HS-V-Pak GT 90 Pulse filters are designed to upgrade existing self cleaning intake filter systems. Their design fits smoothly for common intelt air filtration systems at gas turbines. Advanced media processing machines allow us to install the latest developments on pulse cleaning filter medias. The sturdy steel framework is corrosion protected by expoxy coating encapsulating the media packs. The  filtermedia is consiting from fully synthetic bico media, containing no cellulose for maximum moisture resistance, low pressure drop, highest rigidiry and superior dust release while pulsing. HS-V-PAK GT90 also offer an optimzied fold geometrys compared to the classic product. The Filtermedia ist evenly distanced in full depth of the filtermedia and fixated by sturdy gluelines. Instead of four over-the- top gluelines HS-V-PAK GT 90 Pulse offer one stablilizationstring every 25 mm over the whole surface. That allows a perfect aspect ratio between fold entry and depth of a mediafold. This brings pressure drop furtherly down, allow highly improved dust release and more energy efficiency at pulse cleaning and operation.

Datenblatt