Washable filter pads are used in air conditioning and air ventilation equipment, when regeneration of the mats after cleaning is required. HS-synthetic fibre filter pads consist of randomly arranged curled synthetic fibres in a multi-layered structure with a graduated density towards the clean air side of the media. Resin and/or thermal bonding provides for a high performance nonwoven fleece. Its engineered structural design has proven to guarantee longer life and high dust holding capacity with low differential pressure-loss in the most demanding applications. After dust saturation filter mats can be easily cleaned either by blowing or washing and be reused.

Standard roll dimensions are 20 x 2 m, pads of all sizes can be cut on order.

Datasheet

These filter pads are applied in air conditioning or air ventilation equipment for increased perfomance levels as well as supply air filtration for surface finishig. After dust saturation these mats are simply replaced by new ones.

Standard roll dimensions are 20 x 20 m and cut pads can be supplied as required.

Datasheet

These compact filtercells serve as prefilter for HVAC systems and Turbines offering maximum filtration abilities at minimal dimensions. HS-Alpha Pak´s greates benefits is the compact construction with frame depths of 48 and 96 [mm], the outstanding dust holding capacity, maximized filter surface as well as hygienic design. HS-Alpha Pak are availiabe in two different filterclasses (EN779: G4 and M5). The frame of HS-Alpha Pak is made of rigit extruded polystyrene profiles with edge connectors. This guarantees optimal hygienic as well as stability and also ensures easy disposal because the whole filter can be incinerated.
The high quality synthetic filter media offers deep-filtration effects thus archieving higher dust holding capacities than similar products from other manufacturers. It is pleated to self-supporting folds that are fixed by plastic spacers offering even more rigidity.
HS-Alpha Pak can also serve as pre-filters for turbine air intakes.

Datasheet

this range of HS-bag filters have spacers inserted in the individual bags, ensuring even air flow throughout the entire filter unit and at the same time evenly distributing the store dust. This extends the lifespan of the filter and reduces energy costs due to the lower pressure. Another advantage is the constant filter efficiency even with varying airflow. These bag filters stand on their own frames and therefore do not need to be secured. With oversize bag filters the surrounding frame is reinforced with angles in the corners of the frame.

All standard sizes are fitted with air aerodynamically shaped entry guides to optimize the energy efficiency.

Datasheet

The product family HS-AirSynErgy is a bagfilter based on synthetics that reflects the highest technology standard is in regards to mechanical effiicency combined with long service lifetime and therefore a better energy saving potential. HS-AirSynErgy's performance is superior over usual glas- and common synthetic bag filters.

Paralel, tapered separarors in the bags of this high quality Filters ensure a stable air guiding form that allows an even airflow within the filter. Therefore all bags are evenly saturated with dust and particles. HS-AirSynErgy is different from other bag filters. The filtermedia offers a special inner wave structure that thus offers double active filtersurface by only consuming the space of a conventional filter. Combined with the air guiding profiles in at the air entry HS-AirSynErgy achieves up to 35% less pressure dop  in comparison to common bag filters. This saves the user up to 1100 kW/h operational energy (equals approx. 620g CO₂/p.a.).  

The media structure with the enlarged inner surface offers an expicit higher dust loading capacity of up to +80%. This allows a much higher service lifetime without taking any drawback with the energy consumption compared with usual bag filters. HS-AirSynErgy is not requireing any electrostatics for the norm approved operation. A steady rise of the efficiency is ensured over the complete service lifetime. The filter fulfills the EN779:2012 requirements at any time.

Easy to notice: The cross section illustrates that the waved structure offers a much larger filtration surface in the same dimensions as usual flat media

As can be seen here, the elongated version of the waved media is twice as large as the common non-waved version. This lowers the pressure drop for filters and gives the user the maximum dust holding capacity.

The filtermedia of the HS-AirSynErgy series consists only of fully synthetic materials. The fibres are flexible and break-proved so a displeasing fibreshedding as seen with glassfibre bag filters while unpacking and handling is absolutely impossible.

All standard sizes are fitted with air aerodynamically shaped entry guides to optimize the energy efficiency.

Datasheet

This range of high quality HS-Bag filters is fitted with additional parallel seams sewn in the individual bag filters, ensuring even air flow through the unit at the same time guaranteeing the efficient use of the filter by evenly distributing the stored dust or waste. This extends the life span of the filter and reduces the energy cost for the airflow through the filter. On the clean airside the bag filters are fitted with an additional felt type material in order to achieve a greater stability and to handle larger airflow volumes.

All standard sizes are fitted with air aerodynamically shaped entry guides to optimize the energy efficiency.

Datasheet

HS-Beta Pak are robust finedustfilter for depths small as 48 mm and 96 mm by request up to 150 mm. Suited for Reconfiguration or replacement of AC units, substituting common Zig-Zag-pleated with a more hygienic filter. Also applicable at systems where actual filter efficiency is not enough (i.e. finedust problems in city-air).

HS-Beta Pak are robust fine dust filters, employed as preliminary or main filters when long filter service lives are required in large and/or variab- le volume flows. Typical areas of application are electronics and computer rooms, pharmaceutical production areas, research laboratories, hospitals, industrial ventilation and preliminary filtration for particulate air filters. They fit in all standard fra- mesystems or mounting frames of various manuf- acturers for particulate air filters, according to the design variant. They are suitable for use as replace- ment filters in all standard commercially available mounting frames. Due their small depth HS-Beta Pak save space in new constructed ventilation systems.

These filters are also great space savers when existing venti- lationssystems need to be rigged up for higher filter classes. The sturdy plastic frame fulfills the demands for high rigidity and hygiene combined with the ease of disposal since the filters are com- pletely metalfree and thus fully incinreable.

Datasheet

High performance compact filters are available in three filter classes.

Airflow volumes up to 5000 [m³/h] with only 292[mm] installment depth required.

HS-Mikro Pak filters are mostly used at air conditioning, ventilation and turbine applications for fine dust filtration. These filters are used as primary and/or main filters to prevent toxic gas, aerosol and general dust pollution. They are especially suited for for handling large airflow volumes and achieve long service life times due to their large dust storage capacity.HS-Mikro Pak filters fit most standard supporting frames from various manufacturers. The filtermedia consits of high quality glass fibre paper with varying efficiencies. Thermoplastic spacers between tightly packed individual filter folds, ensure even spacing. The supporting frame is made form plastic and therefore makes disposal easy because the complete filter could be reduced to ash, once burned.

The design and construction of the HS-Mikro Pak provides a high rigidity and corrosion is impossible. The filter media is water resistant and also suitable for use in conditions with high humidity. A temporary increase in the of the pressure drop is normal. With reduced humidity the pressure drop returns to normal levels.

HS-Mikro Pak filters can be fitted with the clean-air or dust side and are great space savers when used in new systems due to their minimal mounting depths. Options like foamed gasktes or burst protection gills on the clean air side are possible - please ask for special applications.

Datasheet

Activated carbon cartridges are used for the absorption of gaseous or odor intensive pollutants with ventilation and extraction systems. The basic unit consists of a base-frame (610 x 610 mm) and 16 single cylindrical cartridges filled with activated charcoal. According to required airflow volumes several units can be fitted to a filter wall. The cartridges are manufactured either from metal sheeting or stainless steel. We can also re-furbish used cartridges on our premises.

Datasheet

The HS Carbo Pak filter assigned for the adsorption of disturbing smells e.g. kitchen smells, tobacco smells, cosmetics, body smells etc., in addition, for the adsorption of gaseous and/or air pollutions injurious to health (mainly hydrocarbons) and intake / exhaust air ventilation systems.

Specification:
HS Carbo Pak consist of a corrosion resistant plastic framework with 6 active carbon plates. A circulating 25 mm flange enables the application with standard supporting frames.

Datasheet

HS-Carbo Pak² FAK combines secure filtration ability for particles (i.e. finedusts such as pollen, spores etc.) and gaseous air impurities (i.e. tobaco smoke fumes, hamful gases emitted by city traffic). The standardunit offers a combination of EN779:F7 and aprox. 7kg activated carbon. HS-Carbo Pak² FAK is ideally suited to upgrade existing filtration soltion by gas-phase filtration without requirering changes in the filterhousings.

Specification:
HS-Carbo Pak² FAK consist of a rigid, corrosive resistant plastic with circulating 25 mm flange and 8/6 particle & gas filtration packages. The preassure drop is similar to a standard bag filter (3400 m³/h @ 110 Pa)

Download

Rigid mounting frames manufactured from galvanised sheeting or stainless steel fitted with a glued seal. Filter inserts are secured with a tensioning system, which ensures proper centralised fitment of the filter insert. Standard frames are manufactured to standard size, which allow exact and safe fitment in modular sections to any filter wall system.

Datasheet

This filter wall consists of individual supporting frames and the filter-wall frame, and, if required, reinforced sheeting can be fitted. It is designed for dust and clean-air sided operations and, according to the specific task, will be fitted with module or micro pack filter inserts with varying filter efficiencies and volumes, as required.

Datasheet

The HS-Vario CAT programme is the solution for your tasks in air filtration. The modular design allows to meet the requirement of most different fields of applications. Ranging from simple one-filter-stage supply or exhaust air filtration with bag filters to multi-stage filter solutions including regulateable fans. You can choose individually about the air-flow that should be handled, filter stages, auxillary equipment or installation position the required HS-Vario CAT should have. All integrated filtermounting frames are fitting for filters from HS-Luftfilterbau as well as standard filters of various other manufacturers. The extruded profile offers a circulating 30 mm frame and allows direct connection to the ducting or the mounting of connecting pieces either with flanges or other tube connectors.

Datasheet

Solid channel housing made from galvanised sheeting with a removable side panel for servicing of filter units. The configuration is from the left or from the right according to the airflow direction. The filter inserts are secured in v-shape configured mounting frames between the supporting grills and mounting clips. This design also allows the use of filter cells.

Datasheet

This filter wall consists of the filter-wall frame, the surrounding support frame (where required) and individual supporting frames. With the use of filter matting inserts, supporting grills and frames for the filtermats are fitted. For modular fitting, an angle frame is supplied.

Datasheet

Stabiles Kanalgehäuse aus verzinktem Stahlblech mit seitlicher Revisionsöffnung, Anordnung rechts oder links bezogen auf die Luftrichtung. Durch die flache Bauweise von nur 180 mm ist das Gehäuse platzsparend. Die Aufnahme des Filtermediums erfolgt in einem herausziehbaren Schnellwechselrahmen mit Stützgitter und Andruckspangen. Es können auch Filterzellen eingesetzt werden.

Datenblatt